FINITEELEMENTANALYSIS相关论文
With the increase in traffic density and speed of motor vehicles tire noise became an important area of research. A numb......
...
Mixed-mode Ⅰ-Ⅱ crack-based fatigue crack propagation (FCPⅠ-Ⅱ) usually occurs in engineering structures;however,no th......
Optimized functional linked neural network for predicting diaphragm wall deflection induced by brace
Deep excavation during the construction of underground systems can cause movement on the ground,especially in soft clay ......
Biomechanical Effects of Tibial Stems with Different Structures on Human Knee Joint after Total Knee
Porous structure in orthopedic prosthesis may reduce micromotion and increase the service life of implants.The purposes ......
使用交变或均匀磁场对导电转子进行加速或减速的技术,广泛应用于转速稳定的静电陀螺,用于姿态控制的力矩球和磁场支持下的超高速离......
Experimental and numerical study of deposition mechanisms for cold spray additive manufacturing proc
Cold spray is an attractive and rapidly developing process for additive manufacturing with high efficiency and precision......
Finite element analysis of the treatment of middle clavicle fracture with wing plate internal fixati
Objective: To investigate the mechanical properties of a new type of biplane locking plate with wings in the treatment o......
基于有限元方法模拟的单轴拉伸试验,研究了具有不同孔洞位置的两种增材制造铝板的波传播特性.本文使用有限元方法获得所需的数据,......
Soft and wet actuator systems have attracted great attention in some applications,such as assistive technologies for reh......
Three-beam laser internal coaxial wire feeding cladding is regarded as a promising additive manufacturing technique beca......
Pipelines in geological disaster regions typically suffer the risk of local buckling failure because of slender structur......
...
...
An Average Failure Index Method for the Tensile Strength Prediction of Composite Adhesive-bonded?Joi
An average failure index method based on accurate FEA was proposed for the tensile strength prediction of composite out-......
...
...
Performance Evaluation of Concrete Pavement Slab Considering Creep Effect by Finite Element Analysis
Creep,as an intrinsic property of concrete material,will inevitably affect the performance of concrete pavement slabs in......
In this work we present a failure investigation on turbine housing used in automotive diesel turbocharged engine which h......
Diesel engine cylinders main bearing cover is tightened by torque Angle method,the bolt is subjected to high preload,and......
Finite Element Analysis on Widening Arch Bridge by Installing Precast Segmental Bridge Deck Slabs in
This paper studies the technology of installing precast segmental ribbed double cantilever bridge deck slabs in longitud......
Design and manufacture of composite truss joints using vacuum assisted resin infusion molding proces
Subtract: The object of present study is to design and manufacture T-shaped and K-shaped composite truss joints using no......
The finite analysis of the elastic properties of 3d full 5 directions braided composites in consider
The finite element analysis of the 3d full 5 direction braided composites elastic properties always replaced the elastic......
Based on the nonlinear finite element theory, the disturbance conditions of deep water reservoir sediment in the process......
Generally a number of microcracks coalesce and form a local dominant crack into metals which would then propagate subcri......
Finite Element Analysis of Biomechanical Behavior of Fractured Tibia Applied by Composite Bone Plate
Human tibia fracture is one of the most frequent bone fractures because tibia supports body weight directly.Generally, w......
应用HyperMesh分析软件对减速机机架有限元模型进行了模型的前后处理,得到减速机机架在不同工况下的应力图和变形图。通过分析机架......
为了准确获得空气悬架试验台的固有频率，尝试使用有限元方法对试验台进行模态分 析。首先在HyperWorks 中对空气悬架试验台三维模型......
Multilayer anodic bonding technology has become one of the key technologies of encapsulation devices of micro electro me......
Primary Stability Analysis of Implant Designs on Immediately Loaded Dental Implant Using Finite Elem
...
应用HyperMesh分析软件对减速机机架有限元模型进行了模型的前后处理,得到减速机机架在不同工况下的应力图和变形图。通过分析机架......
本文根据液压制动夹钳支持销的工作原理与载荷条件，以CRH2高速动车组的制动参数为依据，利用HyperWorks软件强大的前处理功能，建立系统......
Finite element analysis on temperature and stress field under Different substrate preheating tempera
Plasma cladding processing was performed using Ni-based powder on mn13 steel substrate. The variation of temperature and......
Temperature field simulation of continuous casting square billet during induction heating process fo
For realizing the straight bar rolling, one method will be used in a bar line that uses the mode of induction heating to......
The steel and metallurgical developments to support lightweighting,performance improvements and improved line efficienci......
Lattice Dome Deformation and Stress Analysis for Crude Oil Tanks under Differential Foundation Settl
The lattice dome,instead of the ribbed structure,has been popularized used in large crude oil tanks.The deformation and ......
Finite Element Analysis of Residual Stress in Diamond-like Carbon Multilayer Film Prepared by Filter
...
An average failure index method for the tensile strength prediction of composite adhesive-bonded πjo
An average failure index method based on accurate FEA is proposed for the tensile strength prediction of composite out-o......
Effect of the Microstructure on Thermo-Mechanical Properties of Shape-Memory Polymer Reinforced with
Shape-Memory Polymers (SMPs) are being investigated for practical use as deployable space structures, such as large ante......
In this paper,a 3D finite element model is established to simulate the ultrasonic shot peening process by using a finite......
采用ANSYS有限元分析软件,建立了简化的模型,计算结果得到了带膨胀节和不带膨胀节两种情况下变径虾米弯结构的应力和位移分布状态,......
在建立了铝基短碳纤维复合材料的三维细 观力学分析模型后，运用ANSYS 有限元分析软件分析 计算了碳纤维不同体分比的铝基碳纤维复合......
The housing structure design and finite element analysis of decarburization separation membrane unit
Biogas purification and separation membrane system makes it possible by increasing calorific value of ordinary biogas.Th......
The structure design and finite element analysis of decarburization separation membrane module shell
Biogas purification and separation membrane system makes it possible by increasing calorific value of ordinary biogas.Th......
In this regard,small specimen test technology(SSTT)is very attractive since it enables cost-effective simulation of mate......
Beam-column joints("BCJ")are critical members in low-rise to mid-rise buildings.Failure of BCJ may lead to collapse of......
The rotary bending fretting fatigue tests were conducted by the press-fit assembly consisted of locking assembly,pad and......
